Right Auto Spares supplies Fleetguard fuel filters and fuel-water separators for commercial vehicles, diesel engines, trucks, buses and heavy-duty applications. The range covers fuel filtration requirements for Ashok Leyland, Eicher, Tata, Mahindra, Volvo and other commercial vehicle applications, with Fleetguard part numbers and OEM references available for application-based identification.

If you have a Fleetguard FF or FS part number, OEM reference or vehicle application, send the details to Right Auto Spares for pricing and availability. For bulk requirements, you can also share your complete filter list, quantities and delivery destination.

Send your Fleetguard fuel filter number or OEM reference to request a quotation.

Fleetguard Fuel Filters for Diesel Engines and Commercial Vehicles

Fuel filters are application-specific components, and the correct replacement depends on the vehicle, engine, filtration system and filter configuration.

The Fleetguard range includes fuel filters, fuel strainers, fuel-water separators, filter heads and selected filter assemblies for different commercial vehicle and diesel engine applications. Some fuel-water separator applications are specified with drain valves, while others are listed without drain valves.

For accurate identification, buyers can provide:

• Fleetguard FF or FS part number
• OEM or cross-reference number
• Vehicle model
• Engine model
• Fuel system or application
• Drain valve requirement, where applicable
• Required quantity
• Delivery destination

This information is particularly useful when sourcing filters for older commercial vehicles or when several similar filter configurations are available.

Fleetguard Fuel Filter Part Numbers

Selected Fleetguard fuel filter applications include:

The available range contains additional fuel filtration applications, so using the exact part number or application details is recommended before placing an order.

Fleetguard Fuel Filters for Ashok Leyland

The Fleetguard fuel filter range includes several Ashok Leyland applications covering different engines and fuel-system configurations.

Selected references include:

• FF5552 for the CB18 FIP CRS engine
• FF5532 for the Neptune engine
• FF5479 as a fuel strainer for BS II and BS III applications
• FA5534 for the 1.1 LTR coil-type application
• FA5533 for the 0.5 LTR coil-type application
• 8710330 head assembly with FF5532 for the Neptune engine
• 5021135 head assembly with FF5552 for the CB18 FIP CRS application

For buyers looking for a complete filtration setup rather than only the filter element, selected head assemblies are also listed.

Fleetguard Fuel Filters for Eicher

Eicher applications include both conventional fuel filters and fuel-water separators.

Selected fuel-filter references include:

• FF5540 for HD Legacy BS III
• FF5528 for 10.95 and 11.10 4-cylinder applications
• FF5479 as a BS III fuel strainer
• FA5534 for the 1.1 LTR coil-type application
• FF5539 for HD Legacy BS III
• FA5533 for the 0.5 LTR coil-type application
• 5031353 for the E494 BS IV biodiesel engine
• FF42148 for Eicher 6K and 8K Series BS IV vehicles

This range also includes fuel-water separator references for Eicher Pro 5000, LMD, HD Legacy, E494 and 1102/1103 applications.

Fleetguard Fuel-Water Separators

A fuel-water separator is a distinct filtration product from a standard fuel filter. It is designed for applications where water separation is part of the fuel filtration arrangement.

The available Fleetguard range includes fuel-water separators with different configurations, including products with and without drain valves. This distinction is important when identifying a replacement because the correct configuration depends on the application.

Selected references include:

For Ashok Leyland, the range includes FS20309 as a pre-filter for Boss and E-Commet, FS20308 as the main filter for Boss and E-Commet, FS20283 and FS20282 for NA/N6/H6 BS VI applications, along with FS19674, FS19671, FS19669, FS19650, FS19636 and FS1003 for other engine applications.

Fleetguard Fuel-Water Separators for Ashok Leyland

Ashok Leyland applications include several fuel-water separator configurations.

Examples include:

• FS19674 for Ashok Leyland Boss BS IV engine
• FS19671IV for CB18 FIP CRS engine BS IV with drain valve
• FS19671 for CB18 FIP CRS engine BS IV without drain valve
• FS19669 for H6 engine inline pump
• FS19650 for Neptune engine
• FS19636 for BS II and III applications
• FS1003 for H6 CRS engine
• 8710331 head assembly with FS19650
• 8710071 head assembly with FS19636
• 5021136 fuel-water separator with head assembly for CB18 FIP with H6 CRS engine
• 5022425 head assembly with FS19669 for H6 engine inline pump
• 8321007 drain valve for FS19636

The presence of both drain-valve and non-drain-valve versions makes application verification especially important before ordering.

Fleetguard Fuel Filters for Mahindra and Volvo

The available range includes fuel filtration references for Mahindra and Volvo applications.

For Mahindra, FF5540 is listed for the Blazo above 16T truck with a 7.2L engine and OEM reference 0305DAV03030N.

For Volvo, FF05272 is listed for the Volvo FM12 application with OEM reference 8193841.

When ordering for commercial fleets, providing the vehicle model and existing OEM or Fleetguard reference helps distinguish between similar applications.

Fleetguard Fuel Filters for Tata Applications

The available product range also includes fuel filtration references for Tata applications, including fuel-water separator products.

For Tata HCV requirements, FS20309 and FS20308 are listed as pre-filter and main-filter applications for the Tata 1518 Ultra.

If the vehicle uses a multi-stage fuel filtration arrangement, specify whether you require the pre-filter, main filter or complete requirement when requesting a quotation.

Fleetguard Fuel Filter Cross Reference

Fleetguard fuel filters can be identified using either the Fleetguard part number or the applicable OEM reference.

Examples from the available range include:

• FF5552 → FHJ01000
• FF5532 → X8820800
• FF5479 → F8824500
• FA5534 → F4003400
• FA5533 → F4003300
• FF5540 → ID328305 for Eicher HD Legacy BS III
• FF5528 → ID002939
• 5031353 → ID356046
• FF42148 → ID346437
• FF05272 → 8193841
• FS19674 → P7B00022, F002H22095
• FS19671IV → FHN00400
• FS19671 → PHJ00004
• FS19669 → FHJ00700
• FS19650 → F7B00100
• FS19636 → F8835100

A cross-reference is useful for identification, but the application should still be checked before ordering. This is particularly important where a product has different configurations, such as fuel-water separators with or without drain valves.

Buy Fleetguard Fuel Filters in Bulk

Right Auto Spares supports wholesale and international sourcing requirements for automotive filters and spare parts. For bulk Fleetguard fuel-filter enquiries, provide your complete part list instead of requesting each filter separately.

Include:

Fleetguard part number + OEM reference + application + quantity + destination

For mixed fleets, include the vehicle and engine details for each filter requirement. This helps reduce errors when multiple FF or FS references appear similar.

Bulk buyers can include:

• Fleet operators
• Commercial vehicle workshops
• Spare-parts distributors
• Automotive wholesalers
• Exporters and international buyers
• Industrial and heavy-duty equipment suppliers

Why Source Fleetguard Fuel Filters from Right Auto Spares?

Right Auto Spares supplies filtration products and automotive spare parts for commercial and industrial applications, including Fleetguard filters. The business serves buyers across automotive, construction, mining, agriculture, material handling and power-generation sectors.

For fuel filtration requirements, the focus is on matching the part number, OEM reference and application before quotation rather than relying only on product appearance.

This is especially useful for buyers handling older vehicles, mixed fleets or fuel-water separator systems with different configurations.

Frequently Asked Questions

1. What is a Fleetguard fuel filter?

A Fleetguard fuel filter is an application-specific fuel filtration component used in compatible diesel engines and vehicle fuel systems. Fleetguard fuel filters in the available range include FF-series and other application-specific references for commercial vehicles and diesel engines.

2. What is the difference between a Fleetguard fuel filter and a fuel-water separator?

A fuel filter and a fuel-water separator are different product categories. A fuel-water separator is designed for applications where water separation is part of the fuel filtration system. The available range includes separate FF fuel filters and FS fuel-water separator references.

3. How do I find the correct Fleetguard fuel filter?

The quickest way is to match the Fleetguard part number or OEM reference with the vehicle and engine application. If you do not have the part number, provide the vehicle model, engine details and existing filter reference for application checking.

4. What is the Fleetguard fuel filter cross reference?

A Fleetguard fuel filter cross reference connects a Fleetguard part number with an applicable OEM or reference number. For example, FF5552 corresponds to FHJ01000, while FF5532 corresponds to X8820800 in the available applications.

5. Where can I buy Fleetguard fuel filters?

You can enquire with Right Auto Spares for Fleetguard fuel filters by providing the Fleetguard part number, OEM reference or vehicle application. Pricing and availability depend on the specific filter, quantity and destination.

6. Do you supply Fleetguard fuel filters for Eicher trucks?

Yes. The available range includes Fleetguard fuel filters for Eicher applications such as HD Legacy BS III, 10.95, 11.10, E494 BS IV, Eicher 6K and 8K Series BS IV vehicles.

7. Do you supply Fleetguard fuel filters for Ashok Leyland?

Yes. The range includes fuel filters for Ashok Leyland CB18 FIP CRS, Neptune and other applications, along with fuel strainers and fuel-water separators.

8. Do Fleetguard fuel-water separators have drain valves?

Some do and some do not. The available range includes specific fuel-water separator versions with drain valves and versions without drain valves. For example, FS19671IV is listed with a drain valve, while FS19671 is listed without one.

9. What is a fuel-water separator with a drain valve?

It is a fuel-water separator configuration that includes a drain-valve arrangement. The correct configuration depends on the vehicle or engine application. Do not substitute a drain-valve and non-drain-valve version without confirming compatibility.

10.Can I buy Fleetguard fuel filters in bulk?

Yes. Bulk buyers can submit multiple Fleetguard part numbers, OEM references, quantities and delivery requirements in one enquiry. This is useful for fleet operators, workshops, distributors and international buyers.

11. Can you identify a Fleetguard fuel filter from an OEM number?

Yes. OEM or cross-reference numbers can be used to help identify the relevant Fleetguard filter. For example, FHJ01000 is listed against FF5552, while ID356046 is listed against Eicher application 5031353.

12. Can I order a Fleetguard fuel-water separator by application instead of part number?

Yes. If the part number is unavailable, provide the vehicle or engine model, fuel-system details and any existing OEM reference. This is particularly important when the application has separate pre-filter and main-filter requirements or different drain-valve configurations.

Request a Fleetguard Fuel Filter Quote

Have the Fleetguard FF or FS number? Send it for pricing and availability.

Have only the OEM reference? Send that instead.

Not sure which filter you need? Share the vehicle model, engine details and existing filter reference.

For bulk or export requirements, include your complete part list, quantities and delivery destination.

Enquire now for Fleetguard fuel filter pricing and availability.